Supercharger Seal Kit 4A-GZE
Supercharger Seal Kit 4A-GZE  [12312003]

4A-GZE Supercharger Seal Kit

For SC12 Superchargers only.

Kit contents.

(1) Outer case O-ring
(2) Internal oil shaft seals
(2) (1 OZ) Tubes of Loctite Epoxy

 

Ever wonder where your Supercharger oil goes? Your internal oil seals will wear out over time causing the supercharger to lose its oil. The oil is the most important part of the supercharger, even a low oil level can cause a supercharger to fail and cease up. Why risk it? A burnt out charger can cost you upwards of hundreds of dollars and that is just for a used one! If you can find it. This kit does not include new supercharger oil or bearings. You will need to reuse your original bearings and purchase new supercharger oil.

Kit does not come with instructions. It is designed for the mechanically inclined only. If you do not know what you are doing, DO NOT attempt this rebuild. Have a professional rebuild the supercharger for you.

Installation requires a complete tear down of the supercharger.

We will not be held responsible for any engine damage due to your negligence or improper installation.

Applications include the following vehicles. Please check your specific motor prior to purchasing.

Corolla AE86 GTS August 1984 - July 1987 (8408-8707)

Corolla AE92 GTS August 1987 - June 1991 (8708-9106)

MR2 AW11 December 1984 - December 1989 (8412-8912)

 

$39.99

Major Applications:

  • Make
  • Model
  • Year Range
Universal Product
Reviews

Customers who bought this product also purchased

Year Make Model






   Clear Vehicle
Manufacturers
1 x Crank Seal 3S-GTE GEN II
1 x PCV Valve Grommet 3S-GTE (GEN III)
1 x 5S-FE Distributor Seal Kit
1 x Cam Shaft Seal Kit (Gen III 3S-GTE)
1 x Oil Pump Seal Kit 3S-GTE
1 x Distributor Seal Kit 3S-GTE (GEN III)
1 x Distributor O-ring 3S-GTE (GEN III)
1 x Boost Gauge Tubing 1/8 OD
1 x Water Outlet Gasket 3S-GTE (GEN III)
1 x Fuel Injector O-ring Kit 3S-GTE (GEN III)
1 x Water Pump Seal Kit 3S-GTE GEN II
1 x Distributor O-ring 4A-GELC
1 x Distributor Housing O-ring 4A-GE / 4A-GZE
1 x Rear Wing Gasket Set (Toyota MR2 1998-99)
1 x Boost Gauge Tubing 1/8 OD
2 x C-Pillar Rubber Trim Kit (Toyota MR2 MKI)
1 x Boost Gauge Tubing 1/8 OD
1 x Distributor Seal Kit 20V
1 x 3S-GTE GEN II Thermostat and gasket
1 x Distributor O-ring 3S-GTE
1 x Transaxle Shaft Seals S-54 Series
2 x Tail Light Gasket (Toyota MR2 MKI)
1 x Cam Shaft Oil Seal Kit 4A-GE / 4A-GZE
1 x Boost Gauge Fitting 1/8 NPT
1 x Boost Gauge Fitting 1/8 NPT
1 x Cam Position Sensor (CPS) Seal Kit 4A-GZE DLI
1 x Valve Stem Seals (Lot of 16) 3S-GTE (GEN III)
1 x Cam Shaft Oil Seal Kit 3S-GTE
2 x Distributor Seal Kit 3S-GTE
1 x Dipstick Tube O-ring 4A-GE / 4A-GZE
1 x Valve Cover Gasket Kit 3S-GTE (GEN IV)
2 x Side Skirt Trim Kit (Toyota MR2 MKI)
1 x Boost Gauge Fitting 1/8 NPT
2 x Distributor Seal Kit 4AGE / 4AGZE
1 x Fuel Injector O-ring Kit 20V
2 x Front Valance Rubber Trim Kit (Toyota MR2 MKI)
1 x Oil Filter Housing Seal Kit 20V
1 x Distributor Seal Kit 5S-FE
1 x A/C Compressor O-ring Kit 4A-GE / 4A-GZE
2 x Side Vent Rubber Trim (Toyota MR2 MKI)
1 x Dipstick Tube O-ring 3S-GTE
1 x Distributor O-ring 20V
1 x Front Lens Gasket Kit (Toyota MR2 MKI)
1 x Fuel Injector O-ring Kit 1Z-ZFE
2 x Boost Gauge Tubing 1/8 OD
1 x Distributor Seal Kit 89-94 Suzuki Swift 1.3 DOHC GT & GTi
1 x Boost Gauge Fitting 1/8 NPT
$1,149.42
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
Currencies