Supercharger Seal Kit 4A-GZE
Supercharger Seal Kit 4A-GZE  [12312003]

4AGZE Supercharger Seal Kit

Seal repair kit for SC12 Superchargers only.

Kit contents.

(1) Outer case O-ring
(2) Internal oil shaft seals
(2) (1 OZ) Tubes of Loctite Epoxy

 

Ever wonder where your Supercharger oil goes? Your internal oil seals will wear out over time causing the supercharger to lose its oil. The oil is the most important part of the supercharger, even a low oil level can cause a supercharger to fail and cease up. Why risk it? A burnt out charger can cost you upwards of hundreds of dollars and that is just for a used one! If you can find it. This kit does not include new supercharger oil or bearings. You will need to reuse your original bearings and purchase new supercharger oil.

Kit does not come with instructions. It is designed for the mechanically inclined only. If you do not know what you are doing, DO NOT attempt this rebuild. Have a professional rebuild the supercharger for you.

Installation requires a complete tear down of the supercharger.

We will not be held responsible for any engine damage due to your negligence or improper installation.

Applications include the following vehicles. Please check your specific motor prior to purchasing.

Corolla AE86 GTS August 1984 - July 1987 (8408-8707)

Corolla AE92 GTS August 1987 - June 1991 (8708-9106)

MR2 AW11 December 1984 - December 1989 (8412-8912)

 

$39.99

Major Applications:

  • Make
  • Model
  • Year Range
Universal Product
Reviews

Customers who bought this product also purchased

Year Make Model






   Clear Vehicle
Manufacturers
1 x 3S-GTE (GEN III) Water Outlet Gasket
1 x Cam Shaft Oil Seal Kit 4A-GE / 4A-GZE
1 x 2-156 Buna 70 Duro Oring
1 x Distributor O-ring 3S-GTE
1 x 2-258 Buna 70 Duro Oring
1 x Front Lens Gasket Kit (Toyota MR2 MKI)
2 x Front Valance Rubber Trim Kit (Toyota MR2 MKI)
2 x Side Skirt Trim Kit (Toyota MR2 MKI)
1 x Distributor Housing O-ring 4A-GE / 4A-GZE
1 x Distributor O-ring 20V
1 x 3S-GTE (GEN II) Exhaust Manifold Gasket
1 x 2-217 Buna 70 Duro Oring
1 x 2-222 Neoprene 70 Duro Oring
1 x Rear Wing Gasket Set (Toyota MR2 1998-99)
1 x Boost Gauge Fitting 1/8 NPT
1 x Fuel Injector O-ring Kit 3S-GTE (GEN III)
2 x Distributor Seal Kit 4AGE / 4AGZE
2 x Side Vent Rubber Trim (Toyota MR2 MKI)
1 x A/C Compressor O-ring Kit 4A-GE / 4A-GZE
1 x 3S-GTE (GEN III) Thermostat w/gasket 3S-GTE
1 x Distributor O-ring 4A-GELC
1 x C-Pillar Rubber Trim Kit (Toyota MR2 MKI)
1 x 12.5 X 22.00 X 5.00 MM SL
1 x Boost Gauge Tubing 1/8 OD
1 x Boost Gauge Fitting 1/8 NPT
1 x Boost Gauge Tubing 1/8 OD
1 x Cam Position Sensor (CPS) Seal Kit 4A-GZE DLI
1 x Fuel Injector O-ring Kit 20V
1 x 2-033 Buna 70 Duro Oring
1 x Valve Stem Seals (Lot of 16) 3S-GTE (GEN III)
1 x Boost Gauge Fitting 1/8 NPT
1 x Water Pump Seal Kit 3S-GTE GEN II
1 x 18.00 X 30.00 X 7.00 MM DL
1 x 2-122 Buna 70 Duro Oring
1 x Boost Gauge Fitting 1/8 NPT
1 x Distributor Seal Kit 3S-GTE (GEN III)
1 x Cam Shaft Seal Kit (Gen III 3S-GTE)
1 x Oil Filter Housing Seal Kit 20V
1 x 2-035 Buna 70 Duro Oring
$697.56
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
Currencies