12312003

Supercharger Seal Kit 4A-GZE [12312003]

4AGZE Supercharger Seal Kit

Seal repair kit for SC12 Superchargers only.

Kit contents.

(1) Outer case O-ring
(2) Internal oil shaft seals
(2) (1 OZ) Tubes of Loctite Epoxy

Ever wonder where your Supercharger oil goes? Your internal oil seals will wear out over time causing the supercharger to lose its oil. The oil is the most important part of the supercharger, even a low oil level can cause a supercharger to fail and cease up. Why risk it? A burnt out charger can cost you upwards of hundreds of dollars and that is just for a used one! If you can find it. This kit does not include new supercharger oil or bearings. You will need to reuse your original bearings and purchase new supercharger oil.

Kit does not come with instructions. It is designed for the mechanically inclined only. If you do not know what you are doing, DO NOT attempt this rebuild. Have a professional rebuild the supercharger for you.

Installation requires a complete tear down of the supercharger.

We will not be held responsible for any engine damage due to your negligence or improper installation.

Applications include the following vehicles. Please check your specific motor prior to purchasing.

Corolla AE86 GTS August 1984 - July 1987 (8408-8707)

Corolla AE92 GTS August 1987 - June 1991 (8708-9106)

MR2 AW11 December 1984 - December 1989 (8412-8912)

$39.99

Major Applications:

Make
Model

Year Range

Universal Product

Customers who bought this product also purchased

Side Skirt Trim Kit (Toyota MR2 MKI)

Shopping Cart

1 x	Distributor O-ring 3S-GTE
1 x	Fuel Injector O-ring Kit 3S-GTE (GEN III)
2 x	Side Vent Rubber Trim (Toyota MR2 MKI)
1 x	Front Valance Rubber Trim Kit (Toyota MR2 MKI)
1 x	Dipstick Tube O-ring 3S-GTE
1 x	Front Lens Gasket Kit (Toyota MR2 MKI)
1 x	Cam Shaft Seal Kit (Gen III 3S-GTE)
1 x	Distributor Seal Kit 3S-GTE (GEN III)
1 x	Crank Seal 3S-GTE GEN II
1 x	Side Skirt Trim Kit (Toyota MR2 MKI)
1 x	Boost Gauge Tubing 1/8 OD
2 x	Tail Light Gasket (Toyota MR2 MKI)
1 x	Cam Shaft Oil Seal Kit 3S-GTE
1 x	PCV Valve Grommet 3S-GTE (GEN III)
2 x	C-Pillar Rubber Trim Kit (Toyota MR2 MKI)
1 x	Distributor O-ring 3S-GTE (GEN III)
1 x	Boost Gauge Tubing 1/8 OD
1 x	Distributor Seal Kit 5S-FE
1 x	5S-FE Distributor Seal Kit
1 x	Oil Filter Housing Seal Kit 20V
1 x	2-222 Buna 70 Duro Oring
1 x	18.00 X 30.00 X 7.00 MM DL
1 x	Boost Gauge Tubing 1/8 OD
1 x	Water Outlet Gasket 3S-GTE (GEN III)
1 x	2-122 Buna 70 Duro Oring
1 x	Distributor Housing O-ring 4A-GE / 4A-GZE
1 x	Fuel Injector O-ring Kit 1Z-ZFE
1 x	12.5 X 22.00 X 5.00 MM SL
1 x	Cam Shaft Oil Seal Kit 4A-GE / 4A-GZE
1 x	Distributor O-ring 20V
1 x	42.00 X 62.00 X 10.00 MM DL
1 x	Rear Wing Gasket Set (Toyota MR2 1998-99)
1 x	Boost Gauge Tubing 1/8 OD
1 x	Boost Gauge Fitting 1/8 NPT
1 x	Cam Position Sensor (CPS) Seal Kit 4A-GZE DLI
1 x	2-217 Buna 70 Duro Oring
1 x	2-156 Buna 70 Duro Oring
1 x	2-258 Buna 70 Duro Oring
1 x	48.00 X 70.00 X 12.00 MM DL
1 x	Valve Stem Seals (Lot of 16) 3S-GTE (GEN III)
1 x	42.00 X 60.00 X 7.00 MM DL
1 x	Distributor Seal Kit 3S-GTE

$752.52

Share Product

Reviews

Write a review on this product!

Currencies